Professional Paint Cleanser & Sealant to Protect any painted or gel coat vehicle surface. Developed and manufactured in the UK.
Use after washing or polishing to give a glossy, protective barrier with incredible water beading - the sample pictures attached showing water beading are from a customer and shows the bonnet of their 2008 Fiat Panda, you can see how fantastic it looks and how well it is beading water off. For best results polish the paintwork first. The last picture shows an 8 year old VW Polo I bought for my daughter, treated with our polish and then 2 coats of paint sealant.
Clean paintwork with the Perfect Finish Prep Panel Wipe first, to remove any contaminants and previous coatings and give a perfectly clean surface. This will give you better, longer lasting results with the paint sealant.
The paint sealant is easier to apply & longer lasting than traditional wax - spray it onto a microfibre applicator or cloth, apply it in a cross hatch motion working on one panel or small area at a time, leave it to cure for 1 minute - not allowing it to fully dry - then buff with a clean, dry microfibre cloth. For the very best results wait at least one hour, then apply a second coat.
Top tip - the Panel Wipe also makes a fantastic glass cleaner, but always use it in well ventilated areas and do not use it on plastic windows
Option - Make the job easier, add our fantastic quality polishing cloths. Made by the company that invented microfibre in the 80's, we do not believe you will find better quality - add to your order for just £3 each. They are machine washable and can be reused for years to come.
Perfect for polishing off, the Yellow Cloths are extremely thick, soft and plush - heavyweight 550gsm cloth, they can be laundered over 500 times - 40cm x 40cm size (just under 16" square) - no comparison to the cheap microfibres you'll see elsewhere, which are often only 200gsm weight or less
Laundering instructions for the cloths
Cloths are recommended to be washed at around 30-40 degrees for economy, but the quality is such that you can wash them at up to 95 degrees if required. Slight shrinkage in the first few washes will happen. It's best not to use fabric softener/conditioner, it leaves a coating on the fabric and stops the microfibres from working as well as they should. They actively benefit from tumble drying - it opens up the fibres. Unlike most cheap microfibres, the threads will not burn at higher temperatures
Professional Paint Cleanser & Sealant to Protect any painted or gel coat vehicle surface. Developed and manufactured in the UK.
Use after washing or polishing to give a glossy, protective barrier with incredible water beading - the sample pictures attached showing water beading are from a customer and shows the bonnet of their 2008 Fiat Panda, you can see how fantastic it looks and how well it is beading water off. For best results polish the paintwork first. The last picture shows an 8 year old VW Polo I bought for my daughter, treated with our polish and then 2 coats of paint sealant.
Clean paintwork with the Perfect Finish Prep Panel Wipe first, to remove any contaminants and previous coatings and give a perfectly clean surface. This will give you better, longer lasting results with the paint sealant.
The paint sealant is easier to apply & longer lasting than traditional wax - spray it onto a microfibre applicator or cloth, apply it in a cross hatch motion working on one panel or small area at a time, leave it to cure for 1 minute - not allowing it to fully dry - then buff with a clean, dry microfibre cloth. For the very best results wait at least one hour, then apply a second coat.
Top tip - the Panel Wipe also makes a fantastic glass cleaner, but always use it in well ventilated areas and do not use it on plastic windows
Option - Make the job easier, add our fantastic quality polishing cloths. Made by the company that invented microfibre in the 80's, we do not believe you will find better quality - add to your order for just £3 each. They are machine washable and can be reused for years to come.
Perfect for polishing off, the Yellow Cloths are extremely thick, soft and plush - heavyweight 550gsm cloth, they can be laundered over 500 times - 40cm x 40cm size (just under 16" square) - no comparison to the cheap microfibres you'll see elsewhere, which are often only 200gsm weight or less
Laundering instructions for the cloths
Cloths are recommended to be washed at around 30-40 degrees for economy, but the quality is such that you can wash them at up to 95 degrees if required. Slight shrinkage in the first few washes will happen. It's best not to use fabric softener/conditioner, it leaves a coating on the fabric and stops the microfibres from working as well as they should. They actively benefit from tumble drying - it opens up the fibres. Unlike most cheap microfibres, the threads will not burn at higher temperatures
